Wednesday, August 17, 2011

Progskeet how to use with flasher progskeet teensy hxd program

Downgrade Your PS3 v3.70 Using ProgSkeet or Teensy++

Downgrade Your PS3 v3.70 Using ProgSkeet or Teensy

Downgrade Your PS3 v3.70 Using ProgSkeet or Teensy

Developer dospiedras1973 at elotrolado has released a method in order to downgrade your PS3 using a hardware flasher device such as ProgSkeet – NAND and NOR reader/writer or Teensy++ for the people that own PS3 models that are using the 16mb NOR Flash. What you will need is a PS3 fat or slim updated to standard v3.70 firmware, a ProgSkeet or Teensy++, hxd program, and a file available to download called Downgrade.bin. Make sure the PS3 is on firmware v3.70 and not any other firmware. Do not try any other version as that has not been tested. As always use with caution and make sure you know what you are doing before attempting this. Below is a rough translation from elotrolado.

Progskeet

Progskeet


Hello all, I got it at the end we have a ps3 downgrade 3.70 for slim consoles this time is different than it has done with consoles fat, I’ve got the two flashers progskeet Teensy + + and Al nougat!

We need:

fat or slim console with updated standards to 3.70 “DO NOT TRY TO ANOTHER VERSION”

Solution to write and read the rules of the console (or flasher progskeet teensy + +)

hxd program (which I use to edit hex)

FlowRebuilder v.4.1.3.2

a beer (this is important)

Http://pastebin.com/yuvJ5Leh Downgrade.bin


First dumped our NOR flash, the file must accurately measure “16,777,216 bytes” neither more nor less Draw out several to be absolutely sure of what you do

cojemos the dump “example josejuan.bin”

and we have to introduce it in a file flowrebuilder to make it readable (bytereverse) the option is called bytereverse dump and extract rules

what we do and we will create a file but the extension ends in. bin.REV

open it with the hxd and took our personal data to the console EID, BOOTLOADER, CSID and METLDR no need to put any more

take them out as follows flasher progskeet teensy:

choose for example in this case to stick our METLDR prepatched to downgrade the image attached to this tutorial

inside the folder where we put the flowrebuilder. rev also has created another folder called “nombredeldump.EXT”

then there are our personal archives of our console and we need to introduce them to catch some pre-patched image that I have since opened the flasher progskeet teensy hxd program and open the file and metldr downgrade.bin is inside the folder asecure_loader


choose the tab on the hxd metldr and copy the entire contents into HEX and enter the downgrade.bin

press control + 820 g write position is that of METLDR

right-click on the first line of position 820 to give to “stick type” and so the same way we introduce others to enter the files are:

METLDR: Position “820″ size “EDE0″

BOOTLOADER_0 Position “FC0000″ size “40000″

EID: Position “2F000″ size “10000″

CISD: Position “3F000″ size “800″

then we take the downgrade.bin with saved changes and we put in the option flowrebuilder bytereverse dump and extract rules PROGRAM THIS TIME WE WILL GIVE AN ERROR but is a normal error, if error occurs is that okay done and you create a file named downgrade.bin.REV will be the file you have to enter in the console “flash”

If all went well to finish writing you kindle the console and will press the button or English ps ps push button NO NOTHING PULSEIS apagais the console and put it in factory service mode once this need to put the correct file system for 3.55 jaicrab with lv2diag of cfw without reader and a special


lv2diag:

http://www.logic-sunrise.com/telecharge … icrab.html

cfw: http://pastebin.com/03MFDLGV

kindle the console with the stick with these two files on the usb device into the far right of the console and shut down one to 10 / 15 minutes,flasher progskeet teensy ps3 kindle the console without any usb connected to verify that you correctly leads to xmb If all went well apagais the console and you put your lv2diag FILE2 of this pack:

http://pastebin.com/gGETcxMR

the console will turn on and 20 seconds will turn itself off and CONGRATULATIONS you have your console in functional kmeaw cfw 3.55 100% 100

Progskeet how to use:

DiGiTaLAnGeL (Tester with progskeet)


Glevand & mfw builder team (cfw)

NDT (Assistant) is a very good person

JaiCraB (lv2diag without reader)

Robs1 (my guide with the normal flash)

EussNL (his great support in the wiki that I use every day PS3DEVWIKI.COM)

Defyboy (to create ps3devwiki)

A whole channel # irc-hispano.org darkps3 for their support and many hours of testing we have hit bastards eh!

DemonHades (because if you had not put the cover on your website with the lie that contastes on me, I had not met or uf6667 DigitalAngel and these two helped me a lot)


and finally the people have asked me for a private place to donate paypal button, because here it is.

Greetings and set aside now will resume my work with the dual ProgSkeet barebone PCB of nand and dump 3.6x gives me so many problems jejej.

Make sure that you know what you are doing with this, as we are not responsible for any damage to your system.

0 comments:

Post a Comment

Share

Twitter Delicious Facebook Digg Stumbleupon Favorites More